Ozone can be released by laser printers and photocopiers, especially older models, in enclosed copy rooms. This reactive gas may irritate eyes, nose, throat, and lungs. Modern devices and proper ventilation reduce risk, while other pollutants have different sources.

Multiple Choice

What pollutants can copy rooms contribute to?

Copy rooms can contribute to ozone pollution because many laser printers and photocopiers emit ozone during operation. Ozone is produced by the electrical discharge inside these devices as they interact with air, especially in older equipment. In enclosed spaces, this reactive gas can build up and irritate the eyes, nose, throat, and lungs, making it a notable indoor air quality concern. Modern devices and good ventilation help mitigate this risk. Other options don’t fit because carbon dioxide mainly reflects occupant and equipment presence rather than a byproduct specific to copying; radon comes from soil and building materials; and nitrogen dioxide is typically produced by combustion sources.

Copy rooms have a surprising, and sometimes overlooked, impact on indoor air quality. If you’ve ever stood near a printer or photocopier in a busy office, you might have noticed a faint, chemical odor or a tingling sensation in your eyes after a long print run. That’s not just your imagination—those devices can generate ozone, a reactive gas that can affect comfort, health, and even the performance of a space designed to support focused work.

Ozone in the Office: How Copy Rooms Contribute

Ozone is a molecule made of three oxygen atoms. In the atmosphere, it can be a shield or a pollutant, depending on where you are. Indoors, however, ozone tends to be a nuisance. Many laser printers and photocopiers emit ozone as a byproduct of the electrical discharge that powers their imaging processes. This is particularly true for older equipment, where the design and seals aren’t as refined as today’s models. In a tightly packed copy room or a small, enclosed suite, those tiny ozone particles can accumulate, especially if the room lacks adequate ventilation.

The health and comfort implications are real but often subtle. Ozone at low levels can irritate the eyes, nose, and throat. Some people may experience coughing or a feeling of chest tightness after prolonged exposure, particularly if they have asthma or other respiratory sensitivities. The odor associated with ozone isn’t necessarily strong, but the irritant effect compounds over time. For spaces that run lots of copies or prints, this can become more than a nuisance—it can influence concentration and overall well-being of the people who use the room.

Where it fits in the WELL framework is simple: indoor air quality is foundational. The WELL Building Standard emphasizes ventilation, filtration, and air-cleaning strategies that safeguard occupants’ health and comfort. When copy rooms are part of a work environment, they aren’t just back-of-house spaces. They’re kinetic zones where equipment, people, and air interact. Good design treats them as such, with thoughtful placement, engineering controls, and ongoing monitoring.

Ventilation and Sizing: The First Line of Defense

The most straightforward way to manage ozone in a copy room is to ensure adequate ventilation. That means more than just opening a door now and then. It’s about delivering sufficient outdoor air flow to dilute any ozone and related emissions, then removing them through a balanced exhaust system. Two practical routes work well:

  • Local exhaust: A dedicated exhaust fan that pulls air from the copy room to the outdoors can dramatically reduce the buildup of ozone and any other off-gassing odors. The key is to create a slight negative pressure so emissions don’t migrate into adjacent work areas.

  • General ventilation with targeted filtration: If you don’t have a separate exhaust, a well-designed ventilation system that brings in outdoor air and vents it at strategic points can still keep ozone concentrations low. Pair this with an effective filtration strategy (more on that below) to catch particulate matter and other volatile organic compounds that might accompany printing activities.

Question to ponder: How do you know if the room is ventilated enough? It’s not just about numbers on a chart. It’s about the lived experience—are colleagues escaping the room with a dry throat or irritated eyes after a printing burst? IAQ measurements aren’t always required day to day, but when a space feels stuffy or reactive, it’s a signal to reassess.

Filtration, Purification, and the Role of Equipment

Filtration plays a dual role in reducing indoor pollutants, including those related to copying. High-efficiency filtration can capture some ozone-related byproducts and other particulates released during printing. However, it’s important to set expectations: filtration alone doesn’t remove ozone from the air. Ozone is a gas, and while filters on air handling units contribute to cleaner indoor air, they don’t reliably scrub ozone out to negligible levels. That’s why ventilation and source control are the better first lines of defense.

Source control is where the smart design choices come in. Modern printers and copiers tend to emit less ozone than older units, but they still can contribute. When outfitting or retrofitting a copy room, look for devices that advertise low ozone emission levels, and consider placing the room away from sensitive work zones. Shielding materials, well-sealed rooms, and minimizing the time doors stay open during busy periods can help.

Another tactic is to reduce the generation risk at the source. Very simply, newer devices generally emit less ozone than older ones. If your building has a mix of equipment, a staggered replacement plan can pay off in air quality dividends over time. When choosing devices, check for ozone emission data, energy efficiency, and quieter operation—after all, comfort matters as much as clean air.

Beyond Ozone: Other Pollutants to Keep an Eye On

Ozone is a notable indoor air quality concern in copy rooms, but it’s not the only pollutant that deserves attention. Here are a few others that often travel hand in hand with copying activities:

  • Particulates: Fine dust and toner particles can become airborne during printing. These are typically captured by proper filtration and local exhaust rather than relying on general ventilation alone.

  • Volatile organic compounds (VOCs): Some cleaning agents, toner formulations, and printer fluids release VOCs. Choosing low-VOC products and storing chemicals away from the copy room helps.

  • Carbon dioxide and humidity: CO2 isn’t a toxin, but it’s a practical proxy for ventilation adequacy. Elevated CO2 levels usually mean occupants aren’t getting enough fresh air. Humidity levels also influence perceived air quality and comfort; both extremes can affect concentration and health.

Guidance for a healthier copy room experience: a few practical steps

  • Assess room layout: Is the copy room tucked into a quiet corner, or is it in a busy corridor where doors swing open frequently? The latter can compromise containment. Favor a design that minimizes traffic through the space and uses doors that close firmly.

  • Prioritize dedicated ventilation: If possible, give copy rooms their own ventilation path or a direct exhaust to the outdoors. This keeps emissions from spreading into open-plan work zones.

  • Modernize equipment: When the budget allows, upgrade to devices with lower ozone output. Even small improvements can have a noticeable impact over time.

  • Maintain and test: Regularly service printers, replace filters on HVAC systems, and consider occasional IAQ checks. You don’t need a full-blown monitoring system for day-to-day peace of mind; spot checks can catch drift before it becomes a problem.

  • Rethink consumables and cleaners: Choose products with lower emission profiles and store them away from the copy room. A little planning here goes a long way.

Aesthetics, Comfort, and Health: The Human Side of IAQ

Indoors, air quality isn’t just about numbers. It’s about how a space feels. When the air is clean and comfortable, work flows more smoothly. People don’t notice the air in the same way they notice a nice chair or good lighting, but poor air quality can sap energy, trigger headaches, or make focus feel like a heavier lift. That’s a subtle but very real effect that matters in any setting where people spend significant time around printers and copiers.

From a WELL AP perspective, the goal isn’t simply compliance. It’s cultivating environments where people can think clearly, collaborate easily, and feel physically at ease. Copy rooms are a microcosm of that broader aim: small spaces with outsized influence on daily life. Effective ventilation, smart equipment choices, and a thoughtful layout create a healthier, more productive atmosphere—without turning the space into a chore to manage.

The Human, the Build, and the Tech: A Holistic View

A well-designed space balances human needs with technical realities. Think about how the copy room fits into the building’s broader IAQ strategy:

  • Human-centric approach: People experience air quality through their senses and comfort. Reducing irritants and odors isn’t a luxury; it’s a practical step toward healthier and more enjoyable workdays.

  • Building science mindset: Ventilation rates, filtration efficiency, surface materials, and humidity control all play a role. Each element should align with the overall performance goals of the building, not just be checked off a list.

  • Technology as an ally: The right devices, maintenance plans, and control systems can reduce emissions without adding complexity to operations. A smart, responsive approach to equipment and air quality data makes life easier for facilities teams and occupants alike.

A few real-world touches that help keep air healthy

  • Use a dedicated exhaust hood or vent above the copy station to capture emissions at the source.

  • Invest in energy-efficient fans with variable speed controls, so you don’t oversupply air during off-peak times.

  • Choose printers with low ozone emission ratings and quiet operation to minimize both air quality concerns and noise distractions.

  • Install CO2 sensors in common areas to gauge whether the building is circulating enough fresh air, and respond with targeted ventilation adjustments when needed.

  • Maintain a habit of routine checks—like a health check for the room—so issues don’t sneak up.

Why this matters beyond the walls of an office

Clean air in workspaces isn’t just about comfort. It’s a contributor to long-term well-being, productivity, and even cognitive performance. People who breathe better tend to feel more alert, make fewer errors, and enjoy a smoother workday. In many organizations, that adds up to tangible outcomes: fewer sick days, more efficient collaboration, and a climate where creativity can flourish. The copy room, though small, becomes a small testbed for a broader commitment to healthy buildings.

A concluding reflection: small changes, steady impacts

You don’t need a dramatic overhaul to improve air quality around copy devices. Start with a clear, practical plan: evaluate ventilation, consider equipment upgrades, optimize layout, and keep a watchful eye (and occasional measurements) on the space. The payoff isn’t just cleaner air—it’s a more comfortable, more productive environment where people can focus on the task at hand without being distracted by stuffy air or irritating odors.

If you’re curious about applying these ideas, think about a building you know well. Picture the rooms where people print and copy with routine speed. Imagine how a few targeted changes—like a better exhaust path, a higher-efficiency printer, and a modest boost in fresh air—could transform that corner into a healthier, calmer zone. It’s not a grand redesign; it’s careful tuning. And that’s often where the most meaningful improvements show up.

In the end, copy rooms matter more than they might first appear. They’re small spaces with outsized potential to influence indoor air quality, comfort, and overall workplace wellbeing. With thoughtful design, practical controls, and a touch of human-centered thinking, those rooms can contribute to a building that feels good to live in—one that supports both the mind and the body as you go about your day.